Haftprimer EPE

Adhesion-primer with chromate-free anti-corrosive pigments (zinc-phosphate) on epoxy-ester resin basis

General information
Haftprimer EPE

Field of application

  • Best adhäsion on difficult substrates.
  • Especially for mulitiple layer systems based of PUR.
  • Fast overcoat intervall by 10-20µm dft.

Product properties

  • Silicon-free
  • Contains zincphosphate
  • Coating systems for high temperatures
  • Good elasticity
  • Tolerant to a contaminated support
  • Recoatability: universal

Technical Specification
Haftprimer EPE

Colours Reddish.
Colour deviation (Colour deviations may occur in the range of high temperatures due to the restricted temperature resistance of the pigments)
Flash point >23 °C
Temperature stability -20 up to 200 (short-term up to 300) °C
Gloss Mat
Potential dry film thickness in one working process 10 up to 30 µm
Viscosity Appr. 60 sec running time (DIN 4 mm pot)
Density in kg/l 1,32
Solid content in % 61
Solid volume in % 39
Theoretical spreading capacity
  • 26 m²/l at 15 µm DFT
  • 19,7 m²/kg at 15 µm DFT
Recommended film thickness 50 µm WFT corresponds to 20 µm DFT
Drying (DIN EN ISO 1517) 15 µm DFT
Dust-dry (Tg1) After 15 min
Touch-dry (Tg4) After 25 min
Dry (Tg6) After 45 min
Cured chemically After 7 days
Interval for overcoating
  • after 30 min with single-component topcoats
  • after 30 min with two component topcoats

Note

  • The specifications are based on standard atmospheric conditions 23/50, DIN 50014.
  • Lower temperatures and/or higher humidity will prolong drying and hardening.

Safety information
Haftprimer EPE

(See Security Data Sheet)

VOC-level Appr. 515 g/l
Solvent content Appr. 40 % by weight
Aromatic content Appr. 35 % by weight

Storage
Haftprimer EPE

Storage

  • In dry, cool rooms, if possible frost-proof
  • Ensure good ventilation

Shelf life

  • 6 month from date of delivery when in unopened original containers in cool and dry conditions

Application methods
Haftprimer EPE

Airless spraying

  • Flow pressure 180 bar
  • Nozzle size 0,09 inch (2,29 mm)
  • Spraying angle according to the geometry and size of the object to be laquered

Compressed air spraying

  • Spraying pressure 3 - 5 bar
  • Nozzle size 1,3 - 1,5 mm
  • Adjust to spraying viscosity (appr. 30 s DIN 4 mm) adding appr. 3 % Derozink-Verdünnung (two component products: after mixing)

Electrostatic application

  • Can be applied as delivered

Dipping

  • Can not be applied as delivered

Other methods

  • Roller and brush application for repair work is possible

Thinner

  • Max. 5% Derozink-Verdünnung

Cleaning

  • Rinse immediately with Derozink-Verdünnung
  • Residues are dissolvable with Derozink-Verdünnung

Preparation of support

  • If necessary clean with high pressure-cleaner and turbo-cleaner-solution
  • Mill scale, welding residues, dust, soluble residues from chemical pretreatments and zinc reaction products which might reduce adhesion have to be carefully and thoroughly removed

General remarks

  • During coating and drying the humidity should be min. 10 % / max. 85 %
  • During coating and drying the environmental temperature should be min. 5°C / max. 30°C
  • Object temperature at least 3° C above dew point.

Example for a system

  • Primer coat: Haftprimer EPE
  • Intermediate coat: 2K-Derocryl Haftgrund EG HS
  • Finish coat: Miscellaneous

Derisol Hydro Shopprimer

Newest Shopprimer Generation

Shopprimer Hydro EcoWeld

2K-Hydropox Shopprimer

See the products

2K-Derocryl Lack AgriFlex

ACE- Agriculture Construction Earthmoving Equipment

High Gloss DTM High Solid. Excellent corrosion protection at 60 µm DFT.

Product Information

2K-Derocryl Lack DTM Rapid

HS One layer coat with extremly fast drying at high layer thicknesses

Two component coat on acryl resin. Economic coating system for steel

See more details

The general information and descriptions contained in this specification are provided to the best of our knowledge. Our information and specifications do not constitute warranted characteristics in the legal sense. Any advice for preparation and application which may be provided verbally, in writing or by means of experiments is of general nature only, and any property rights of third parties are also to be regarded in this context. Our general instructions do not release you from your obligation to check the suitability of the products supplied by our company for the intended methods and purposes of application. Particular in those cases when our supplied material will be applied with products from other sources. The products are prepared, applied and used outside of our sphere of control and thus fall solely within the user´s scope of responsibility.
Our general terms of sale and delivery apply as agreed.

Quick access to product information.

Dr. Demuth Derisol Lackfarben GmbH & Co. KG

Hillerser Straße 8, 37154 Northeim
Telefon +49 5551 / 97940
Telefax +49 5551 / 979430

Cookie Settings

We use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy

Necessary Cookies
Statistical Cookies
Third-party Cookies
Accept Change Settings
www.dr-demuth.com

Cookie Settings

More information on how we use cookies in our cookie policy.

­

Necessary Cookies

Without these Cookies services you have asked for cannot be provided.

Statistical Cookies

Allow anonymous usage statistics so that we can improve our offering.

Third-party Cookies

Third-party cookies that are integrated to deliver personalized ads for you.

Cookies We use on This Site