Derogrund

Anti rust primer with chromate-free anti-corrosive pigments (zinc-phosphate) on alkyd resin basis. Frei von Blei-, Cadmium- und Chrom VI-Verbindungen.

General information
Derogrund

Field of application

  • Protection against corrosion for iron and steel
  • Primer in a multi-layer system for a lower rust protection requirement
  • Not suitable for coating of metals for interior use according to the deco paint directive.
  • Can be used as a welding primer with the addition of 10% Derozinc thinner.

Product properties

  • Resistance to mineral oils
  • Tolerant to a contaminated support
  • Overcoatability: with alcyd paints
  • Recoatability: with polyurethane paints (2K Derocryl)
  • Release by the company Hensel GmbH, Germany as a primer for fíre protection systems F30- F90

Technical Specification
Derogrund

Colours redbrown, light-grey, black, grey.
Flash point >23 °C
Temperature stability -20 up to 120 (short-term up to 150) °C
Gloss Mat
Potential dry film thickness in one working process 80 up to 100 µm
Viscosity Thixotrope
Density in kg/l 1,37
Solid content in % 66
Solid volume in % 46
Theoretical spreading capacity
  • 5,75 m²/l at 80 µm DFT
  • 4,2 m²/kg at 80 µm DFT
Recommended film thickness 175 µm WFT corresponds to 80 µm DFT
Drying (DIN EN ISO 1517) 80 µm DFT
Dust-dry (Tg1) After 50 min
Touch-dry (Tg4) After 90 min
Dry (Tg6) After 3 h
Accelerated drying 30 min. at 60°C possible, after 10 min. flash-off time
Interval for overcoating
  • after 3 h with alcyd paints
  • after 3 h with two component Derocryl topcoats

Note

  • The specifications are based on standard atmospheric conditions 23/50, DIN 50014.
  • Lower temperatures and/or higher humidity will prolong drying and hardening.

Safety information
Derogrund

(See Security Data Sheet)

VOC-level Appr. 465 g/l
Solvent content Appr. 34 % by weight
Aromatic content Appr. 34 % by weight

Storage
Derogrund

Storage

  • In dry, cool rooms, if possible frost-proof
  • Ensure good ventilation

Shelf life

  • 6 month from date of delivery when in unopened original containers in cool and dry conditions

Application methods
Derogrund

Airless spraying

  • Flow pressure 180 bar
  • Nozzle size 0,011 - 0,015 inch (0,28 - 0,38 mm)
  • Spraying angle according to the geometry and size of the object to be laquered

Compressed air spraying

  • Spraying pressure 2 bar
  • Nozzle size 1,3 - 2 mm
  • Adjust to spraying viscosity (appr. 30 s DIN 4 mm) adding appr. 10 % Derozink-Verdünnung (two component products: after mixing)

Electrostatic application

  • Application is possible, provided that the material is set to the appropriate conductance for the system concerned
  • It should be noted that,adapting the material to the appropriate conductance for the system concerned,may prolong drying and impair the resistance to corrosion and weathering

Dipping

  • Can not be applied as delivered

Other methods

  • Roller and brush application is possible in the quality as delivered

Thinner

  • Max. 15% Derozink-Verdünnung

Cleaning

  • Rinse immediately with Derozink-Verdünnung
  • Residues are dissolvable with Derozink-Verdünnung

Preparation of support

  • Shot blasting to a purity according to SA 2½
  • If necessary clean with high pressure-cleaner and turbo-cleaner-solution
  • Mill scale, welding residues, dust and dirt on the surface which might reduce adhesion have to be carefully and thoroughly removed

General remarks

  • During coating and drying the humidity should be min. 10 % / max. 85 %
  • During coating and drying the environmental temperature should be min. 5°C / max. 30°C
  • Object temperature at least 3° C above dew point.

Example for a system

  • Primer coat: Derogrund
  • Finish coat: Deritex 40 HS

Derisol Hydro Shopprimer

Newest Shopprimer Generation

Shopprimer Hydro EcoWeld

2K-Hydropox Shopprimer

See the products

2K-Derocryl Lack AgriFlex

ACE- Agriculture Construction Earthmoving Equipment

High Gloss DTM High Solid. Excellent corrosion protection at 60 µm DFT.

Product Information

2K-Derocryl Lack DTM Rapid

HS One layer coat with extremly fast drying at high layer thicknesses

Two component coat on acryl resin. Economic coating system for steel

See more details

The general information and descriptions contained in this specification are provided to the best of our knowledge. Our information and specifications do not constitute warranted characteristics in the legal sense. Any advice for preparation and application which may be provided verbally, in writing or by means of experiments is of general nature only, and any property rights of third parties are also to be regarded in this context. Our general instructions do not release you from your obligation to check the suitability of the products supplied by our company for the intended methods and purposes of application. Particular in those cases when our supplied material will be applied with products from other sources. The products are prepared, applied and used outside of our sphere of control and thus fall solely within the user´s scope of responsibility.
Our general terms of sale and delivery apply as agreed.

Quick access to product information.

Dr. Demuth Derisol Lackfarben GmbH & Co. KG

Hillerser Straße 8, 37154 Northeim
Telefon +49 5551 / 97940
Telefax +49 5551 / 979430

Cookie Settings

We use cookies to improve your experience and to provide you with personalized content. By using this website you agree to our cookie policy

Necessary Cookies
Statistical Cookies
Third-party Cookies
Accept Change Settings
www.dr-demuth.com

Cookie Settings

More information on how we use cookies in our cookie policy.

­

Necessary Cookies

Without these Cookies services you have asked for cannot be provided.

Statistical Cookies

Allow anonymous usage statistics so that we can improve our offering.

Third-party Cookies

Third-party cookies that are integrated to deliver personalized ads for you.

Cookies We use on This Site